F 350 4WD Pickup V8-7.3L DSL (1988)
Transmission Mounted Parking Brake Disassembly And Assembly
10. Remove the 4 bolts attaching the splash shield and brake assembly to the case. Remove the brake assembly and splash shield from the case.
11. Remove the brake actuating lever and the lever spring from the case.
NOTE: For brake assembly component repair, refer to brake component repair.
Transmission Mounted Parking Brake Disassembly And Assembly
12. Using tool T77F-1 102-A remove the outer bearing cup. The bearing removal will remove the oil seal.
13. Unscrew and remove the vent from the case.
Brake Shoe Disassembly
1. Holding the brake assembly securely. Remove the two brake shoe return springs using a suitable brake spring tool.
2. Spread the free ends of the brake shoes apart and remove the brake shoes from the lower anchor pin. Remove the shoe-to-shoe spring.
Transmission Mounted Parking Brake Shoe Disassembly And Assembly
3. Clean any grease or contamination from the support plate. Remove contamination from the shoe guide lugs and other shoe bearing surfaces with
sand paper.
