F 350 4WD Pickup V8-7.3L DSL (1988)
Remove disc brake caliper from the spindle according to the procedures specified in the 1988 Truck Shop Manual, Vol. A, Section 12-24. "Disc Brakes -
Light and Heavy Duty - Sliding Caliper. After removal, the caliper must be wired to the frame or supported to prevent suspending the caliper from the
brake hose. These precautions are necessary to prevent serious damage to the tube portion of the caliper hose assembly. DO NOT DISCONNECT
CALIPER FROM BRAKE HOSE.
3.
Disconnect the right hand shock absorber from the lower bracket. (See Drawing Attachment I)
4.
Remove the coil spring upper retainer bolts/screws from the upper spring seat, remove the retainer.