F 350 4WD Pickup V8-7.3L DSL (1988)
FIGURE 2 - INSTALLING AXLE PIVOT BUSHING
FIGURE 3
Installation Refer to Attachment 4, Figure 2
3.
Place new pivot bushing (E4TZ-3B177-B) in axle. Assemble Receiver Cup (T78P-5638-A2), Forcing Screw (T78P-5638-A1) and Bushing
Replacer (T78P-5638-A3), as shown in Attachment 4, Figure 2. Note: Add 4 to 6 washers between head of forcing screw and bushing replacer.
Install bushing into axle leaving 1/4 inch gap between the shoulder of the bushing outer metal and the face of the I-Beam as shown in Attachment
4, Figure 3.
4.
Position axle in pivot bracket and install axle pivot bolt through the bracket and axle. Install nut but do not tighten at this time.
