Brake Light Switch Location for F-350 4WD Pickup V8-73L DSL (1988)
Brake Light Switch: Service and Repair
Fig. 7 Stop Light Switch
1.
Disarm airbag system as outlined in MAINTENANCE PROCEDURES.
2.
Disconnect battery ground cable.
3.
Disconnect electrical connector from switch, Fig. 7.
4.
Remove hairpin retainer, then slide stop light switch, pushrod, nylon washers and bushings away from pedal and remove the switch from vehicle.
5.
Reverse procedure to install. Ensure stop light switch wires are of sufficient length to allow full travel of the brake pedal.
