F 350 4WD Pickup V8-7.3L DSL (1988)
Figure 12
1.
Inspect the radius arm bushing part stack, Figure 7.
2.
Measure the radius arm stud length. See the component matrix, Figure 7, to determine the parts involved and the bushing part stack height for the
F-350 DRW 4x2 and the F-350 SRW 4x2. Figures 6 through 12 show the radius arm bushing stack for each truck and follows the matrix.
3.
Install rubber bushing (E7TZ-3B203-A) if it is not present on the vehicle.
