ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Steering Knuckle|Service and Repair|Page 5428 > < Engine - No Start or Hard Start Condition

F 350 4WD Pickup V8-7.3L DSL (1988)

Page 1
background image

Front Steering Knuckle: Service and Repair

Steering Knuckle Assembly

Spindle Cap Service

REMOVE

1. Remove the brake caliper, rotor and axle shaft.
2. Alternately and evenly loosen the four bolts retaining the spindle cap to the knuckle. Loosening the bolts in this manner relieves the spring

compression. Remove the bolts.

3. Remove the spindle cap, compression spring and retainer. Remove and discard the gasket.

Front Steering Knuckle|Service and Repair|Page 5428 > < Engine - No Start or Hard Start Condition