F 350 4WD Pickup V8-7.3L DSL (1988)
3.
Remove the linkage from the truck, Figure 2.
a.
See if the rubber is torn on the RBS. If the rubber is torn, replace it with a greaseable steel joint.
b.
See if the steel joint will spin freely. If the joint spins freely with the hand, replace the joint.
Refer to Figure 2 for specific service part applications.
Steering Gear Inspection:
1.
Inspect the mounting surface of the steering gear. Check the frame area for the following:
^
Signs of motion
^
Loose rivets
^
Cracks - Removal of the gear from the frame may be required to check for cracks.
Figure 3
