ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Supplement I Front End Shimmy|Page 6134 > < Recall - Supplement I Front End Shimmy
Page 2
background image

Attachment II

LABOR ALLOWANCES

Modify Front Suspension . . . . 5.2 Hours    Insert in Box "B" on Form 1864

Administrative Allowance . . . . .0.1 Hours

Note:

Add 0.1 hour Administrative Allowance to the total repair time.

PARTS INFORMATION

Parts will not be direct shipped for this recall. THESE PARTS ARE IN VERY SHORT SUPPLY AND QUANTITIES PER ORDER MAY HAVE TO
BE REDUCED UNTIL PARTS AVAILABILITY IMPROVES. Do not order recall parts from Windsor Export Supply. Order all requirements directly
from Wixom using the mailing address on page No. 1 of this Bulletin. For more urgent handling, use cable address "RECALLS - FORDEX, WIXOM,
MICHIGAN". For locations having telex facilities, our telex Ford private line code is FED and commercial telex code is 669777 answerback Ford FIES
WIX. Our telephone number in Wixom, Michigan, is area code (313) 344-5641. Please give the part number, description, quantity and recall number
when ordering.

Attachment III

REWORKING FRONT SUSPENSION ON 1987/88 F350 4 X 2 DUAL REAR WHEEL VEHICLES ON HOLD

THIS PROCEDURE IS TO BE USED ONLY ON DEALER STOCK VEHICLES

The following describes the actions required to revise the front suspension to correct the potential for front end shimmy.

Requirements are:

1.

Replace both axle pivot bushings with E4TZ-3B177-B

2.

Replace front radius arms with E8TZ-3A360-A (Right side identified with Red Paint Stripes) and E8TZ-3A360-B (Left side identified with Green
Paint Stripe).

3.

Swap camber (caster) adjusters side-to-side.

4.

Replace springs per chart in text.

5.

Set toe-in.

Recall - Supplement I Front End Shimmy|Page 6134 > < Recall - Supplement I Front End Shimmy