F 350 4WD Pickup V8-7.3L DSL (1988)
REMOVING SPACER ("WEDDING BAND") FROM RADIUS ARM ON RIGHT SIDE AND INSTALL
NEW RADIUS ARM BUSHING:
(SEE DRAWING ATTACHMENTS 1, 2, or 3)
2.
Raise the front of the vehicle and place safety stands under the frame and a jack under the axle. Refer to the 1988 Truck Shop Manual, Vol. A,
Section 50-04, Hoisting, Jacking and Towing, for hoisting instructions. Remove front tires. If equipped with stabilizer, disconnect four front
stabilizer bar bolts at frame.
NOTE:
The axle must be supported on the Jack throughout spacer removal. AXLE MUST NOT be permitted to HANG BY the BRAKE HOSE.
