F 350 4WD Pickup V8-7.3L DSL (1988)
INSTALL NEW CASTER/CAMBER ADJUSTERS, RIGHT SIDE (Ref. 1988 Truck Shop Manual. Vol. A, Pg. 14-21-9: (See Drawing Attachment I)
Removal
20.
Remove the upper ball joint caster/camber adjuster clamp bolt nut and remove the clamp bolt from the axle.
21.
Remove the camber adjuster from the axle using Tool D81T-3010-B to wedge the adjuster out of the axle.
Installation
22.
Install the new caster/camber adjuster into the axle, aligning the adjuster pin to the slot in the adjuster correctly. (Drawing Attachment 1)
