F 350 4WD Pickup V8-7.3L DSL (1988)
INSTALL FRONT STEERING DAMPER:
27.
Be sure all surfaces shown in Drawing Attachments 6, 7 and 8 are clean and dry before attaching brackets.
28.
Place template provided in steering damper kit around the passenger side front cross member rivet. Make sure template is flush with the inside of
the frame rail as shown in drawing Attachment 6, Fig. 1. Using a center punch, mark the frame through the holes in the template. Remove the
template and drill two 17/32 inch holes.
29.
Attach Bracket A to the shock end of the steering damper shock as shown in Drawing Attachment 6, Fig. 2. Torque nut to 47-54 N-m (35-40
ft.lbs.). Install bracket A on top of the frame rail as shown in drawing Attachment 7, Fig. 3, and torque nuts to 102-122 N-m (75-90 ft.lbs.).
