F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
SMC PROTECTION
CAUTION:
TO PREVENT FURTHER "STAR CRACKING" AFTER THE PAINT AND/OR SMC FENDER HAS BEEN SERVICED, THE
UNDERSURFACE OF THE FENDER MUST BE PROTECTED. THIS SERVICE CONSISTS OF INSTALLING A SPLASH SHIELD TO THE
INNER FENDER AREA TO PROVIDE A BARRIER TO KEEP TIRE-THROWN STONES FROM CRACKING THE PAINT OR THE SMC
FENDER. REFER TO THE FOLLOWING STEPS TO INSTALL THE INNER FENDER PROTECTION.
1.
Remove the five (5) upper fender-to-body attaching bolts.
2.
Secure the rear fender Splash Shield (F6TZ-16326-AA) in place.
3.
Install the five (5) new bolts included with the splash shield and tighten to 7-11 N.m (5-8 lb-ft).
4.
Repeat Steps 1-3 for the other side.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 96-12-10
WARRANTY STATUS:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage For 1992-97 Model Year Vehicles, Base Warranty Coverage For All Other
Model Year Vehicles
OPERATION
DESCRIPTION
TIME
980115A
Install Fender Shields -
0.4 Hr.
Both
980115
Repair Sheet Molding
Actual Time
Composite (SMC) Cracks
And Repaint
DEALER CODING
CONDITION
BASIC PART NO.
CODE
16326
01
OASIS CODES: 106000, 111000