ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Clutch Pedal Position Switch, Speed Control <--> [Clutch Switch, Cruise Control]|Component Information > < Clutch Pedal Position Switch, Speed Control <--> [Clutch Switch, Cruise Control]|Locations

F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)

Page 1
background image

Vacuum Pump Switch: Service and Repair

Vacuum Hose Routing

Low Vacuum Switch

NOTE:  The distributor modulator valve switch is mounted to the left side fender panel.
 
REMOVAL

1. Disconnect vacuum hose from distributor modulator valve switch.
2. Remove two attaching screws and remove distributor modulator valve switch and A/C compressor mounting bracket (2882).

 
INSTALLATION

1. Position distributor modulator valve switch and A/C compressor mounting bracket to panel and secure with two screws. Tighten screws to 8-11

Nm (6-8 ft lb).

2. Connect vacuum hose to distributor modulator valve switch.

Clutch Pedal Position Switch, Speed Control <--> [Clutch Switch, Cruise Control]|Component Information > < Clutch Pedal Position Switch, Speed Control <--> [Clutch Switch, Cruise Control]|Locations