F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Rocker Arm Assembly: Service and Repair
Left Side
REMOVAL
1. Remove the intake duct tube assembly bolts and the clamps at the turbocharger and air cleaner. Remove the air inlet duct tube assembly.
2. Remove the crankcase breather screws and the breather assembly.
3. Remove the intake duct bracket and retaining nuts.
4. Remove the vacuum pump hose at the vacuum pump (2A451).
5. Remove the valve cover bolts.
6. Remove the valve cover (6582).
WARNING: RED-STRIPED WIRES CARRY 115 VDC. SEVERE ELECTRICAL SHOCK MAY BE RECEIVED. DO NOT PIERCE.
CAUTION: Do not pierce engine electrical wires or damage to the harness may occur.
7. Disconnect the electrical connectors from the fuel injectors and the glow plugs.
8. Disconnect the engine harness electrical connectors from the valve cover gasket (6584).
9. Remove the valve cover gasket.
10. Remove the two rocker arm bolts (6A527).
Rocker Arm Assembly
11. Remove the intake rocker arm (6564) or exhaust rocker arm.
12. Remove the push rod (6565).
