F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Valve Cover: Service and Repair
Left Side
REMOVAL
1. Remove the intake duct tube assembly bolts and the clamps at the turbocharger and air cleaner. Remove the air inlet duct tube assembly.
2. Remove the crankcase breather screws and the breather assembly.
3. Remove the intake duct bracket and retaining nuts.
4. Remove the vacuum pump hose at the vacuum pump (2A451).
5. Remove the valve cover bolts.
6. Remove the valve cover (6582).
7. Disconnect the electrical connectors from the fuel injectors and the glow plugs.
8. Disconnect the engine harness electrical connectors from the valve cover gasket (6584).
9. Remove the valve cover gasket and cover.
INSTALLATION
1. Install the valve cover gasket.
Fuel Injector Connector
2. Connect the electrical connectors to the fuel injectors and glow plugs.
3. Install the valve cover and retaining bolts. Tighten bolts to 11 Nm (8 ft lb).
