F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
17. Disconnect the wiring connector from the brake light switch.
18. Vehicles with manual transmission, disconnect the wiring connector from the clutch switch.
19. Disconnect the wiring connectors from main wiring at left cowl side panel.
20. Remove pinch bolt from steering column to lower steering column shaft. Compress lower steering column shaft toward engine and separate from
the column U-joint.
NOTE: Steps 21, 22, and 23 require 2 technicians.
21. Support the instrument panel and remove the three bolts and one nut attaching the left side of instrument panel.
22. Pull instrument panel rearward and disconnect the heater controls and air conditioner vacuum line connector, if equipped. Remove any remaining
wiring connectors.
23. Carefully remove instrument panel from vehicle through front door.
24. If replacing instrument panel, transfer all components to the replacement instrument panel.
INSTALLATION
1. For installation, follow removal procedures in reverse order.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module
relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.