F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
3.
Scribe a line from the side edge to the top edge of the instrument panel as shown in Figure 1.
4.
Trim the instrument panel, remove and discard the triangular shaped piece(s).
NOTE:
DO NOT EXCEED THE MEASUREMENTS OR THE SIZE OF THE PIECE TO BE REMOVED. IT WILL CAUSE A CUSTOMER
APPEARANCE CONCERN WHICH MAY RESULT IN THE REPLACEMENT OF THE INSTRUMENT PANEL.
5.
Install the "A" pillar moulding(s) as required.
OTHER APPLICABLE ARTICLES: NONE
