F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
9.
If the front disc brake hub and rotor requires cleaning, refer to Steps 10-16.
10. Wash the cap bearing, race and retainer in cleaner solvent and thoroughly dry the components. Repack the bearing with a lithium base grease,
Premium Long-Life Grease XG-1-C or -K (ESA-M1C75-B) or equivalent. Refer to the illustrations for proper positioning of the bearing on the
race.
Bearing Over Inner Race Installation
Bearing Retainer Installation
11. Remove the snap ring and flatwasher from the inner end of the hub lock assembly.
12. Pull the hub sleeve and attached parts out of the drag sleeve.
NOTE: Never remove the brake band from the drag sleeve.
13. Cock the drag sleeve to unlock the tangs of the brake band and remove the drag sleeve assembly.
14. Wash in cleaner solvent and air dry the drag sleeve and brake band. Lubricate the brake band and drag sleeve assembly with 1.5 grams (0.05 oz.) of
Automatic Hublock Grease E1TZ-19590-A (ESL-M1C193-A) (Darmex Spec. DX-123-LT) or equivalent. Work the lubricant over the spring and
the area ofthe drag sleeve under the spring.
Washer And Snap Ring