F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Powertrain Control Module: All Technical Service Bulletins
A/T - E4OD Harsh/Double Bump On Reverse Engagement
Article No.
95-13-7
07/03/95
TRANSMISSION - E4OD - HARSH AND/OR DOUBLE BUMP ON REVERSE ENGAGEMENT - VEHICLES WITH 4.9L ENGINE ONLY
LIGHT TRUCK:
1991-94 BRONCO, ECONOLINE, F-150-350 SERIES
ISSUE:
Some vehicles with an E4OD transmission and 4.9L engine may experience harsh and/or double bump reverse engagements. This may be caused by high
control pressure level.
ACTION:
Perform On-Board Diagnostics as outlined in Service Manual, Section 07-01 A. Repair all non-related transmission Diagnostic Trouble Codes and
concerns first. Rerun the On-Board Diagnostics and replace the Powertrain Control Module (PCM) if the concern is still present. Refer to the following
PCM Application Chart for correct PCM usage.
Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of modifications performed. Select a prominent place adjacent
to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover
it with a clear plastic decal shield.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage For 1992-94 Models, Basic Warranty Coverage For
1991 Models