F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Engine Oil Temperature (EOT) Sensor: Service and Repair
REMOVAL
1. Disconnect engine oil temperature sensor electrical connector.
2. Approximately 0.94 liters (one quart) of engine oil must be removed prior to sensor removal. Remove one quart of engine oil from high pressure
oil pump reservoir using Rotunda Vacuum Tester 014-R1058 or equivalent.
3. Remove engine oil temperature sensor.
INSTALLATION
1. Install engine oil temperature sensor.
2. Connect engine oil temperature sensor electrical connector.
3. Fill engine oil to proper level.
4. Refill oil pump reservoir with engine oil.