F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
1.
Remove fuel filter cap and filter element.
2.
Disconnect the two (2) flexible return fuel hose fittings, fuel bypass hose, and two (2) attaching bolts.
3.
Remove regulator assembly from fuel filter housing, taking care not to damage 0-ring which will be used for reinstallation.
4.
Unscrew strainer assembly from regulator.
5.
Remove orifice and check ball from regulator.
6.
Inspect orifice screen (which may remain in filter housing where regulator was removed), orifice, check ball and strainer screen for debris.
7.
Clean any contamination from parts using disc brake cleaner.
8.
Reassemble all components and verify return fuel flow is now present.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 97-11-18
WARRANTY STATUS: INFORMATION ONLY
Disclaimer
