F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Fuel Return Line: Service and Repair
Remove, Repair, and Install
Engine Fuel Tube Installation
The fuel lines are a combination of flexible and steel tubing fuel supply and return tubes. The fuel tube assemblies are secured to the body rails with
clips.
A damaged section of tubing longer than 305 mm (12 inches) can be cut out of the existing tube assembly and replaced by a comparable service tubing
section, spliced into the tube assembly by means of connecting hoses and retaining clamps. A damaged section of tubing shorter than 305 mm (12
inches) can be cut out of the tube assembly and replaced by a length of service hose and two retaining clamps.
All replacement hoses must be cut to a length and inside diameter that will ensure proper clamp retention.
REMOVAL
1. Disconnect the damaged tube at both ends.
2. Remove the tube from the holding clips along the frame.
