F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Turbocharger Exhaust Inlet Adapter: Service and Repair
REMOVAL
1. Raise vehicle.
2. Loosen nuts and bolts securing right and left turbocharger exhaust inlet pipes to exhaust manifolds.
3. Lower vehicle.
4. Remove bolts securing right and left inlet pipes to turbocharger exhaust inlet adapter.
5. Remove bolts securing exhaust inlet adapter to turbocharger.
6. Remove turbocharger exhaust inlet adapter and gasket.
7. Clean gasket sealing surfaces.
INSTALLATION
1. Using a new gasket, position exhaust inlet adapter to turbocharger. Tighten bolts to 49 Nm (36 ft lb).
2. Position right and left exhaust inlet pipes to exhaust inlet adapter. Tighten bolts to 49 Nm (36 ft lb).
3. Raise vehicle.
4. Tighten nuts and bolts securing right and left exhaust inlet pipes to exhaust manifolds to 49 Nm (36 ft lb).
5. Lower vehicle.
6. Start engine and check for exhaust leaks.
