F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
4.
After reprogramming is complete, an Authorized Modifications Decal (FPS 8262) shown must be installed on the fan shroud. The decal must be
completely filled out with the updated calibration information provided on the WDS or NGS display screen.
5.
Diagnostics must now be performed using the NGS scan tool or WDS and the 1996 Powertrain Control/Emissions Diagnosis (PC/ED) Manual
diagnostic procedures.
6.
Use the OBD II Data Link Connector located under the instrument panel for NGS and WDS hook-up.
7.
Select the appropriate 1996 Service Manual to obtain correct Self-Test Modes and Parameter Identification (PID) menu.
Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the
Authorized Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
In the future, if a 1994 or 1995 PCM requires replacing due to failure, the 1996 model year PCM should be ordered. Refer to the Parts Block
shown for correct part numbers.
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 96-3-18
WARRANTY STATUS: INFORMATION ONLY
Disclaimer
