F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Attn: Dock C Dealer Dept.
2750 Morris Road
Worchester, Pa. 19490
Attachment III - Technical Instructions
SAFETY RECALL 94S84
Certain 1994 F-250/350 and Super Duty Trucks
7.3L D.I. Turbo Diesel PCM Reprogramming or Replacement
TECHNICAL INSTRUCTIONS
NOTE
THOSE DEALERS WHO HAVE SBDS CAPABILITIES AND HAVE RECEIVED THE JULY, 1994 CD-ROM (OR SUBSEQUENT LEVELS IE.
RED MONTHLY UP-DATES) ARE REQUIRED TO UP-DATE THEIR SBDS EQUIPMENT AND REPROGRAM THE PCM.
REPROGRAMMING INSTRUCTIONS
1.
From the SBDS Main Menu, touch "Powertrain Toolbox".
2.
Enter vehicle VIN. Touch "Continue".
3.
From the "Electronic Engine Control" category, select "PCM Reprogramming". Touch "Continue".
4.
Any applicable TSB's or Recalls will be displayed. Touch "Continue".
5.
Follow the Hookup Screen instructions. Connect the D3-73 SBDS adapter to the J1962 OBD-II connector (located under the dash). Connect the
SBDS battery cable leads to the vehicle battery. Make sure the key is ON. Touch "Continue".
6.
At the next screen turn the key OFF as instructed. Insert the SBDS Calibration Update CD-ROM in the CD drive. Touch "Continue".
7.
At the next screen, turn the key ON as instructed. Touch "Continue".
8.
A screen may appear stating "A reprogramming error has occurred". This may happen because the calibration may not support the standard
EEC-V communication protocol. Follow instructions as indicated. Touch "Continue".
9.
At the next screen, turn the key ON as instructed. Touch "Continue".
10.
The screen will display, "Ready to start PCM Reprogramming". Touch "Continue".
11.
A FLASH update screen will appear showing a bar with percent complete.
12.
When the bar reaches 100%, a screen will appear stating "Turn the key OFF". Touch "Continue".
13.
A Screen will appear stating "SBDS has successfully completed PCM Reprogramming. Touch "Continue".
SAFETY RECALL 94S84
Certain 1994 F-250/350 and Super Duty Trucks 7.3L D.I. Turbo Diesel PCM Reprogramming or Replacement
TECHNICAL INSTRUCTIONS
NOTE
THOSE DEALERS WHO HAVE SBDS CAPABILITIES AND HAVE RECEIVED THE JULY, 1994 CD-ROM (OR SUBSEQUENT LEVELS IE.
RED MONTHLY UP-DATES) ARE REQUIRED TO UP-DATE THEIR SBDS EQUIPMENT AND REPROGRAM THE PCM.
REPROGRAMMING INSTRUCTIONS
14.
A screen display of the Authorized Modification Decal (FPS 8262 9/78) will appear. Fill out an Authorized Modification Decal (STAT 5941-2 for
Canada) as displayed and attach it to a clean surface on the fan shroud. The Change Authority is 94S84. Place a clear overlay on the decal. Touch
"Continue".
15.
SBDS will print the log automatically. Attach the log to your file copy of the work order and retain.
16.
Normally, SBDS performs KOEO self-test automatically. However, KOEO self-test is currently not supported on SBDS for this vehicle. Touching
"Continue" will return you to the Main Menu. Instead, select "Menu". The vehicle is now ready to be released.
SAFETY RECALL 94S84
