F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
F-Series SuperCab With Bucket/Captain's Chair Shown, F-Series/Bronco Similar
REMOVAL
1. Using Seat Belt Bolt Bit # 50 Torx T77L-2100-A, remove anchor bolts from rear floor.
2. Remove front seat center passenger belt.
INSTALLATION
1. For installation follow the removal procedures in reverse order.
2. Check sealer around floor anchor holes and add Ford Caulking Cord D6AZ-19560-A (ESB-M4G32-A), if necessary.
3. Tighten anchor bolts to 30-40 Nm (22-30 ft lbs).
4. Check front seat center passenger belt operation.
Front Outboard
SPECIAL SERVICE TOOL REQUIRED
Seat Belt Bolt Bit # 50 Torx, C771-2100-A
REMOVAL
