F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Neutral Safety Switch: Service and Repair
C-6 Transmission
REMOVAL AND INSTALLATION
1. Apply parking brake, then place gear selector lever in Neutral position.
2. Ensure transmission shift cable is correctly adjusted, then loosen Park/Neutral position switch retaining bolts.
3. Insert Gear Position Sensor Adjuster tool No. T91P-70010-A, or equivalent, on Park/Neutral position switch into the three slots provided on the
switch actuator and terminal plate.
4. Leaving the alignment tool in place, torque switch retaining bolts to 6 ft lb.
5. Remove alignment tool, adjustment can be verified visually by making sure the line etched in the housing are in a straight line when the
Park/Neutral position switch is centered in neutral.
6. Check the operation of the Park/Neutral position switch. The back-up lamps should operate only with the transmission selector lever in reverse.
The vehicle should only start with the selector lever in park or neutral.
