F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
2.
Position the removal tool over the bracket and clip as shown in Figure 3.
3.
Align the opening in the removal tool with the retaining tabs which project through the bracket and pull back firmly (when properly aligned against
the bracket, the tool handle will be horizontal but angled slightly downward). This will depress the locking tab but not disengage the clip from the
bracket.
4.
While maintaining the pull on the tool, pull the clip away from the bracket with the free hand.
5.
Examine the adjustment clip for damage during removal. If one (1) or both tabs are broken or no longer spread away from the body of the clip,
replace the clip (F1TZ-14A163-D).
6.
Disengage the cable wire from the temperature door cam pin. Refer to Figure 1.
7.
Refer to the appropriate Service Manual to remove the A/C Heater Control Assembly.
8.
Disengage the cable connector and wire from the temperature door cam pin.
