F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front
REMOVAL AND INSTALLATION
1. Raise vehicle until weight is relieved from front spring with the front wheels still contacting floor. Support axle to prevent rotation.
2. Disconnect shock absorber lower end from U-bolt spacer, then remove U-bolts, cap and spacer.
3. On models equipped with Dana 60 Monobeam axle, remove tracking bar to right spring cap and tracking bar mounting bracket attaching bolts.
4. Remove rear hanger bolt at rear of spring.
5. Remove front shackle bolt and remove spring.
6. Reverse procedure to install.
