F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Disc Spring Replacement
3. Remove snap ring that secures disc spring in clutch cylinder and remove disc spring.
Forward Clutch Piston Removal
4. Apply air pressure to clutch apply passage in cylinder to remove piston.
5. Remove seals from piston and clutch hub as shown in the Forward Clutch Assembly image.
ASSEMBLE
1. Dip new seals in transmission fluid. Install smaller seal on clutch hub and the other seal on piston.
2. Install clutch piston.
3. Ensure steel pressure ring is in groove on piston. Position disc spring in cylinder with convex (dished) face downward. Install spring as shown in
the Disc Spring Replacement image. Secure disc with snap ring.
4. Install forward pressure plate with flat side up and beveled side down. Dip clutch plates in transmission fluid. Install wave plate, then a steel plate
and a composition driven plate. Install remaining plates in this sequence. The last plate installed will be the rear pressure plate as shown in the
Forward Clutch Assembly image.
