F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
3. Remove brass thrust washer and rollers from reverse clutch hub.
INSTALLATION
1. Reverse procedure to install.
Disassembly and Assembly
DISASSEMBLE
CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean
automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with
petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.
Drivetrain Assembly
1. Separate drive train as shown in the Drivetrain Assembly image.
