F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Torque Converter: Testing and Inspection
Torque Converter Reactor One-Way Clutch Test
INSPECTION
1. Insert one-way clutch holding tool No. T77L-7902-R or equivalent in a stator thrust washer groove, then place converter clutch torquing tool No.
T76L-7902-C or equivalent in converter pump drive hub to engage one-way clutch inner race.
2. Attach a torque wrench to torquing tool, Then turn wrench counterclockwise from direction of drive hub opening. One-way clutch should lock and
hold a force of 10 ft lbs.
3. Turn wrench clockwise from direction of drive hub opening. One-way clutch should rotate freely until torquing tool contacts holding tool.
4. Repeat lock-up and hold tests for at least 5 different points in circle of clutch rotation. If, at any point, clutch fails to perform as indicated, replace
torque converter,
