F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
7. Position clutch release shaft, if equipped, into clutch release hub and bearing and align with clutch release lever stud. Push upward on clutch
release shaft until snapped into position.
8. Install clutch release lever dust shield, if equipped.
9. Install the external cylinder clutch slave, or attach hydraulic tube quick connect fitting.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module
(PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.
10. Connect battery negative cable.
11. Operate vehicle to check clutch operation.
