ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Differential Assembly > < M/T - Clutch Chatter On Take-Off
Page 1
background image

Pressure Plate: All Technical Service Bulletins
M/T - Clutch Chatter On Take-Off

Article No. 
94-19-23

09/21/94

CLUTCH - "CHATTER/SHUDDER" ON VEHICLES EQUIPPED WITH A 7.3L IDI TURBOCHARGED ENGINE AND A ZF 5-SPEED MANUAL
TRANSMISSION

LIGHT TRUCK:
1993-94 F-250, F-350

ISSUE:
The subject vehicles may exhibit a "shake/shudder/chatter" on take-off in first, second or reverse gear with no throttle applied. The vehicle's powertrain
may vibrate in this mode of operation due to poor modulation of clutch engagement.

ACTION:
Replace both the clutch disc and cover/pressure plate assembly.

DETAILED SERVICE PROCEDURE

1.

Inspect the clutch cover to confirm that the attaching bolts are all in place and tightened.

2.

If all attaching bolts are in place and tightened and clutch "chatter" is still a concern, then continue to Step 3.

3.

Remove the clutch cover and clutch disc. Refer to the 1994 Powertrain/Drivetrain Service Manual, Section 08-01, for details.

4.

Install a new clutch cover (F4TZ-7563-B) and clutch disc (F4TZ-7550-B) using new bolts (N802096-S2).

Parts Block

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION DESCRIPTION

TIME

941923A

Replace Clutch And

4.1 Hrs.

Pressure Plate Assembly - 
F-Series 4x2 And Super 
Duty

941923B

Replace Clutch And

5.3 Hrs.

Pressure Plate Assembly - 
F-Series 4x4

941923C

Additional Time If Equipped

0.5 Hr.

With PTO - All Models

DEALER CODING 

BASIC PART NO.

CONDITION CODE

7550

08

OASIS CODES: 506000, 703200

Differential Assembly > < M/T - Clutch Chatter On Take-Off