F 350 4WD Super Duty V10-6.8L (2002)
12. Detach the seat assist spring and remove two pushclips securing the manual fore/aft adjuster bar.
NOTE: Do not reuse pushclips. Install new units.
Power seats
13. Disconnect the seat actuator motor electrical connector.
Manual seats
14. Remove the seven screws (four outboard side, three inboard side) securing the seat adjuster tracks to the seat pedestal frame.
INSTALLATION
Manual seats
1. Place the seat tracks on the seat pedestal frame and install the seven screws (four outboard side, three inboard side).
