F 350 4WD Super Duty V10-6.8L (2002)
Brake Pedal Assy: Service and Repair
Brake Pedal Control Switch
Brake Pedal Control Switch
Removal and Installation
1. Disconnect the battery negative cable.
2. CAUTION: Use care not to damage the instrument panel when removing the headlamp switch.
Using a small screwdriver, pry the headlamp switch from the instrument panel.
3. Disconnect the electrical connectors and remove the headlamp switch.
4. Remove the adjustable pedal switch.
1
Push the adjustable pedal switch out of the instrument panel far enough to access the electrical connector.
2
Disconnect the electrical connector and remove the adjustable pedal switch.
5. To install, reverse the removal procedure.