F 350 4WD Super Duty V10-6.8L (2002)
LABOR ALLOWANCES
PARTS REQUIREMENTS / ORDERING INFORMATION
DEALER PRICE
Not applicable.
PARTS RETENTION
Not applicable.
EXCESS STOCK RETURN
Not applicable.
Attachment III - Technical Information
SERVICE PROCEDURE
1.
NOTE: If you determine that the existing PCM calibration is already at the new level (or later) according to the chart, no reprogramming is
necessary.
Identify the existing PCM calibration, then reprogram the PCM to the new calibration found in the applicable chart below. Use one (1) of the
following two (2) methods:
^
Worldwide Diagnostic System (WDS), with the software level indicated in the chart.