F 350 4WD Super Duty V10-6.8L (2002)
Power Steering Pump: Service and Repair
Power Steering
Power Steering Pump - 5.4L and 6.8L Engine
Special Tools
Special Tool(s)
Removal and Installation
1. Remove the drive belt.
2. Remove the power steering pump pulley.
3. Disconnect the high-pressure and return lines.
4. Remove the bolts and the pump.
5. To install, reverse the removal procedure.
6. NOTE: Although the pump has four mounting bolt holes, only three bolts are used to mount the pump on the engine.