F 350 4WD Super Duty V10-6.8L (2002)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Shock Absorber
Removal and Installation
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. NOTE: Both the left and right side shock absorbers are removed and installed the same way. Only the left side is shown.
Disconnect the shock absorber lower mount.
1. Remove the nut.
2. Remove the bolt.
4. Disconnect the shock absorber upper mount.
1. Remove the nut.
2. Pull the shock absorber away from the mounting stud.