F 350 4WD Super Duty V10-6.8L (2002)
Transmission Cooler: Initial Inspection and Diagnostic Overview
Inspection and Verification-Manual Transmission
CAUTION: When internal wear/damage occurs in the transmission, component material can travel into the fluid cooler tubes and the intank
transmission fluid cooler. Remove these contaminants from the cooling system before placing the transmission back into use.
1. Visually inspect for obvious signs of mechanical damage, incorrect component installation, and system leaks Repair as necessary.
-
Install a new or remanufactured radiator when fluid is found leaking from the intank transmission fluid cooler.
2. If the fault is not visually evident, GO to Symptom Chart-Manual Transmission.