F 350 4WD Super Duty V10-6.8L VIN S (2004)
6. Remove the insulator.
Installation
NOTE: Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
1. NOTE: No lubricants of any kind are to be used during body insulator installation.
Follow the removal procedure in reverse order.
Body Support - Rear, Crew Cab, Lower
BODY SUPPORT-REAR, CREW CAB, LOWER
Removal
1. Remove the rear door scuff plate.
2. Remove the rear seat.
3. If equipped, remove the utility tray from behind the rear seat.
4. Pull the carpet or mat back to expose the lower body insulator bolt head.
5. Remove and discard the bolt.
