F 350 4WD Super Duty V10-6.8L VIN S (2004)
Accelerator Pedal: Service and Repair
Adjustable Accelerator Pedal
ACCELERATOR PEDAL - ADJUSTABLE
REMOVAL
1. Position the accelerator pedal in the most rearward (toward the driver) position.
2. Disconnect the accelerator cable and the accelerator pedal adjuster cable from the accelerator pedal.
3. Remove the bolts and the accelerator pedal.
INSTALLATION
1. To install, reverse the removal procedure.
-
If a new accelerator pedal is being installed, make sure the brake pedal is in the most rearward (toward the driver) position before connecting
the accelerator pedal adjuster cable.
