F 350 4WD Super Duty V10-6.8L VIN S (2004)
5. Disconnect the front driveshaft.
1
Remove the four bolts and the two straps.
2
Remove the driveshaft from the pinion flange.
6. Disconnect the spring shackle.
1
Remove the nut and bolt.
2
Position the spring shackle away from the spring.
7. Detach the pushpin and remove the bolt and condenser bracket.
8. Disconnect the spring hanger.
1
Remove the nut and bolt.
2
Using a hammer, tap the spring until the spring is free from the hanger bracket.