F 350 4WD Super Duty V10-6.8L VIN S (2004)
Shifter A/T: Service and Repair
Selector Lever Cable and Bracket
Selector Lever Cable and Bracket
Removal and Installation
All vehicles
1. NOTE: To prevent shift cable damage, do not apply force to the transmission shift cable assembly between the steering column shift tube bracket
and the steering column bracket.
Disconnect the transmission shift cable from the steering column.
1
Disconnect the transmission shift cable from the steering column shift tube lever.
2
Carefully lift the locking tab and disconnect the transmission shift cable from the steering column bracket.
2. Disconnect the cable push pin from the stud in the bulkhead.
3. Push the rubber grommet and transmission shift cable through the bulkhead.
4. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer Maintenance/Service and Repair.
4R100 transmission
5. NOTE: To prevent shift cable damage, do not apply force to the transmission shift cable assembly between the manual control lever and the
transmission shift cable bracket.
Remove the transmission shift cable from the transmission.
1
Disconnect the transmission shift cable from the manual control lever.
2
Depress the locking tabs to release the transmission shift cable and disconnect the transmission shift cable from the transmission shift cable
bracket.