ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Drive/Propeller Shaft: > < Drivetrain - Drive-Away Shudder/Vibration|Page 6040
Page 1
background image

Drive/Propeller Shaft: Customer Interest
Drivetrain - Driveline Noise Under Light Load

TSB 07-13-7

07/09/07

DRIVELINE NOISE UNDER LIGHT LOAD-40-50 MPH
(64-80 KMIH) - 6.0L REGULAR CAB 4X2 WITH 137
INCH WHEELBASE

FORD:
2003-2007 F-250, F-350

ISSUE
Some 2003-2007 F-250/350 Super Duty vehicles equipped with a 6.0L engine, regular cab, and 137" wheel base may exhibit a driveline noise often
described as a scrapping noise and occurs in torque converter lockup between 40-50 MPH (64-80 Km/h) under light load at engine RPM 1200-1400.

ACTION
Replace the driveshaft following Workshop Manual, Section 205-01. This driveshaft has a dampener tuned for this specific noise.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

071307A

2003-2007 F-250/350 4X2

0.4 Hr.

6.0L: Replace The Rear
Driveshaft (Do Not Use
With 4602A)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

4602

42

Disclaimer

All Technical Service Bulletins for Drive/Propeller Shaft: > < Drivetrain - Drive-Away Shudder/Vibration|Page 6040