F 350 4WD Super Duty V10-6.8L VIN V (2005)
5. Install the front seat cushion.
Power seats
6. Connect the seat control electrical connector.
Heated seats
7. Connect the heated seat switch electrical connector.
All seats
8. CAUTION: Bend the side shield slightly to make sure the shield is not scratched by the recliner lever.
Position the side trim cover and install the three trim cover screws.
-
The seat backrest pivot bolt shaft must be inserted into the cover standoff.
9. Push the rearward lower corner of the side shield to engage the metal retaining clip.