F 350 4WD Super Duty V10-6.8L VIN V (2005)
Water Pump: Service and Repair
Coolant Pump - Gasoline Engines
Material
Removal and Installation
1. Drain the engine cooling system.
2. Remove the cooling fan.
3. Remove the accessory drive belt.
4. Remove the 4 bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Remove the 4 bolts and the coolant pump. Discard the O-ring seal.
^
Inspect the mating surfaces. Clean the sealing surfaces with metal surface prep.
^
Install a new O-ring seal. Lubricate the O-ring seal with clean engine coolant prior to installation.
^
To install, tighten to 25 Nm (18 ft. lbs.).
6. To install, reverse the removal procedure.