ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Fluid - A/T: > < Ford Truck F 350 4WD Super Duty V10-6.8L VIN V (2005)|Capacity Specifications|Page 2427
Page 1
background image

Fluid - A/T: Customer Interest
A/T - Engine Stalls When Engaging 'Drive' or 'Reverse'

TSB 05-12-1

06/27/05

ENGINE QUITS UPON DRIVE OR REVERSE
ENGAGEMENT, OR WHEN COMING TO A STOP - 
TORQSHIFT TRANSMISSION

FORD:
2005 E-Series, Excursion, F-Super Duty

ISSUE
Some 2005 Super Duty, Excursion, or E-Series vehicles built between 10/1/2004 and 11/30/2004 and equipped with the Torqshift transmission, may
exhibit an engine quits upon engagement into drive or reverse, or when coming to a stop. Diagnostic trouble codes (DTCs) P1744, P0740, P0741,
P0743, or P0744 may also be present. This may be due to a stuck torque converter clutch (TCC) solenoid.

ACTION
Verify the condition exists. Replace the TCC solenoid following Workshop Manual procedures. Clean the fluid pan and magnet. Flush the cooler lines
and replace the remote filter element. Verify cooler flow. Clear codes, if any, and verify repair. Do not replace the torque converter or the pump
assembly for this concern.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage

OPERATION

DESCRIPTION

TIME

051201A

2005 Excursion/Super

2.8 Hrs.

Duty/Econoline: Verify
Concern, Replace The
TCC Solenoid, Flush The
Cooler Lines, Replace The
Remote Filter, Verify
Cooler Flow, Clear
Diagnostic Trouble Codes
And Verify Effectiveness
Of The Repair (Do Not
Use With 7000F, 7000A11,
7000A43, 7191A,
7191A13, 7191AZG,
7191AXQ)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

7J136

49

Disclaimer

All Technical Service Bulletins for Fluid - A/T: > < Ford Truck F 350 4WD Super Duty V10-6.8L VIN V (2005)|Capacity Specifications|Page 2427