F 350 4WD Super Duty V10-6.8L VIN V (2005)
Throttle Body Spacer: Service and Repair
THROTTLE BODY - SPACER
Removal and Installation
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
1. Disconnect the battery ground cable.
2. Remove the throttle body (TB).
3. Disconnect the main vacuum harness from the TB spacer.
4. Disconnect the PCV tube from the TB spacer.
5. Disconnect the EVAP canister purge valve vacuum hose from the TB spacer.
6. Disconnect the brake booster vacuum hose.
7. Remove the 2 PCV heated element screws.
8. Remove the PCV heated element.
9. Remove the 2 upper TB spacer bolts.