F 350 4WD Super Duty V10-6.8L VIN V (2005)
4. Remove the passenger air bag module.
1
Using a 3/8-inch x 4-inch flat head screwdriver, or equivalent, carefully slide the head of the screwdriver under the right bottom edge of the
door and lift upward, separating the door from the clip. Separate the rest of the door from the clips by lifting the door with your hands.
2
Remove the passenger air bag module.
Installation
1. Position the passenger air bag module into the instrument panel. Install the passenger air bag module retaining nuts and bolts.
2. Install the passenger air bag module door.
-
Align the passenger air bag module door and push in seating the retaining clips.
-
Place six new offset fasteners onto the deployment door.
3. Connect the passenger air bag module electrical connector.
4. Close the glove compartment.
